Transmission PRM 1500 / 1750, MT0547 KIT / MT0585-KIT, Oil pump

In stock

5,480.26
Price incl. VAT, plus Shipping


We supply all gear, accessories and spare parts PRM - NEWAGE

All our hydraulically operated gearboxes feature a twin countershaft design which enables full rated power to be transmitted in ahead or astern with either left or right handed propellers.

Hydraulically operated adjustment free multi disc clutches ensure rapid response to operation of the control lever for good boat handling and manoeuvrability. All models are designed for use with proprietory single lever remote control operating systems.

Gear ratios and performance for all models are identical in either direction making PRM units the ideal choice for twin engine applications. Propellers can be trailed indefinitely when sailing, under low or in multi engine applications when one engine is shut down.

Built for reliability and durability all PRM hydraulic gearboxes feature a manual 'get you home' mechanical lock. This feature allows you to maintain the clutch in the engaged position so that the vessel can be bought safely home in the unlikely event of hydraulic failure.

A safety start switch is available on all hydraulic gearboxes which does not allow engine start up whilst drive is engaged.

Full hydraulic operation, drop centre output shaft with two stage reduction gearing.
 

PRM1750 series marine transmissions are the ideal choice for pleasure and commercial craft applications with engines rated at up to 620 hp (463 kW).

They are available in both shallow and deep case form - corresponding to reduction ratios ranging from 1.22:1 to 3.0:1 and 3.12:1 to 4.9:1 respectively - and are supplied with integral SAE housings as standard.

All PRM1750 series transmissions feature a twin countershaft design compatible with left or right hand propeller rotations - making them equally suitable for both single or twin engine installations. In addition, the PRM1750's two-stage reduction gearing enables maximum input torque of 1750 Nm to be transmitted continuously in either direction at engine speeds of up to 2500 rev/min.

Simple Operation

Operation is by a single lever compatible with proprietary remote control operating systems.

The need for special purpose automatic transmission fluid is eliminated by the use of engine oil specification lubricant.

Durable and Reliable

PRM1750 utilises a maintenance-free oil-operated, self-adjusting multi-disc clutches for consistent reliability and in-service performance.

The gearcase is manufactured from high grade cast iron and is internally ribbed for extra rigidity and strength.

The oil pump, oil filter and hydraulic control valve on all PRM1750 models are mounted externally for easy access and servicing.

Optional equipment

Two optional clutched power take-offs - compatible with SAE classification hydraulic pumps - are available to drive on-board machinery. Further ancillary equipment for PRM1750 gearboxes includes an oil pressure gauge, oil cooler kit and trolling valve.

Nominal Power Ratings - PRM1750 Shallow Case Marine Gearbox
   

PLEASURE

LIGHT COMMERCIAL

HEAVY COMMERCIAL

MODEL

GEAR RATIOS

BHP

kW

BHP

kW

BHP

kW

1750S12SAE3

1.22:1

24.58

18.33

22.85

17.04

22.47

16.76

1750S15SAE3

1.56:1

24.58

18.33

22.85

17.04

22.47

16.76

1750S19SAE3

1.94:1

24.58

18.33

22.85

17.04

22.47

16.76

1750S22SAE3

2.25:1

24.58

18.33

22.85

17.04

22.47

16.76

1750S24SAE3

2.45:1

24.58

18.33

22.85

17.04

22.47

16.76

1750S30SAE3

3.00:1

24.58

18.33

22.85

17.04

22.47

16.76

Ratings are based upon engines with a maximum operating speed of 2500 rev/min

 

S denotes Shallow Case: manufactured only with integral SAE3 adaptor housings.

Nominal Power Ratings - PRM1750 Deep Case Marine Gearbox
   

PLEASURE

LIGHT COMMERCIAL

HEAVY COMMERCIAL

MODEL

GEAR RATIOS

BHP

kW

BHP

kW

BHP

kW

1750D31SAE1
1750D31SAE2

3.12:1

24.58

18.33

22.85

17.04

22.47

16.76

1750D39SAE1
1750D39SAE2

3.88:1

24.58

18.33

22.85

17.04

22.47

16.76

1750D45SAE1
1750D45SAE2

4.50:1

24.58

18.33

22.85

17.04

22.47

16.76

1750D49SAE1
1750D49SAE2

4.90:1

22.48

16.76

20.89

15.58

19.32

14.41

Ratings are based upon engines with a maximum operating speed of 2500 rev/min

 

D denotes Deep Case: manufactured only with integral SAE1 or SAE2 adaptor housings.

Note: These powers are expressed in BHP and kW per 100 rev/min engine speeds, and are measured at the engine flywheel. Ratings have been established to ensure the long, trouble-free life of the gearbox and should not therefore, be exceeded.

Service Classification Definitions

Pleasure: limited to planing hull pleasure craft with a maximum of 500 hours operating time per year, of which not more than 5% should be at full engine throttle, with the balance of usage at 90% or less of full throttle. The use of PRM marine gearboxes according to this classification in any commercial boat, or in sport-fishing charter boats or long-range pleasure cruisers, is not approved.

Light commercial: planing or semi-displacement craft used in pleasure or commercial application may qualify for light commercial rating if annual usage is less than 1500 hours and full throttle operation is limited, with most operating time at partial throttle.

Heavy commercial: all displacement and semi-displacement craft used for commercial applications should be classified as heavy commercial duty. In this type of vessel (such as trawlers, purse seiners, lobster and crab boats, tugs, ferries, offshore supply boats etc.) the gearbox is expected to work at full governed engine speed. The power setting of the engine must be known and must be within the permitted heavy commercial rating of the gearbox.

Important Note

1. It is essential that the engine, transmission model, reduction ratio and propeller size are correctly matched so that the engine can attain its rated speed appropriate to the relevant service classification without labouring.

2. It is also necessary to ensure the torsional compatibility of the complete propulsion system from engine through to propeller, since disregarding this may result in gear noise, particularly at low speed operation and may even result in damage to the engine as well as to transmission components.

PRM Newage Limited will provide all possible information and assistance to help find solutions to potential torsional problems, but it is the ultimate responsibility of the person assembling the drive and driven equipment to ensure that they are torsionally compatible.

Operating Pressure

Minimum - 2827kPa (410lb/in²), maximum 3100 kPa (450lb/in²). Two tapped holes, 1 hole 1/8" BSP on the top and 1 hole M18 on the side of the valve block are provided so that a pressure gauge can be fitted if required.

Oil Cooling

The normal operating temperature of the oil should be in the 50ºC - 80ºC range, and should not be permitted to exceed 90ºC. An oil cooler is necessary to ensure that correct operating temperatures are maintained, and two 1/2" BSP connections are provided on the valve block to allow it to be fitted. The size of the cooler required depends on a number of factors including the transmitted horsepower, operating speed, duty cycle, inlet water temperature and ambient temperature.

Propeller Thrust

Both ahead and astern thrust is carried by the output shaft taper roller bearings which are of ample capacity for all factory approved ratings.

Approximate Weight and Oil Capacity

Gearbox Type

Approximate Dry Weight Oil Capacity
PRM1750D (Deep Case) 300kg (663lbs) 8.0 litres (14 pints)
PRM1750S (Shallow Case) 260kg (570lbs) 8.0 litres (14 pints)
 

Note: Weight excluding drive coupling and cooler.
Note: Oil capacity does not include amount to fill cooling circuit.

Flexible Input Couplings for PRM1750
Manufacturer Flywheel Size Part No.
Centa Transmissions Ltd. SAE 11.5 in MT8462
SAE 14 in MT8459
R & D Marine Ltd. SAE 11.5 in MT8463
SAE 14 in MT8464
Vulkan Industries Ltd. SAE 11.5 in MT8465
SAE 14 in MT8466
 
Other Accessories
Part No Description
MT8330S/A Oil cooler for engines up to 340kW
MT8331S/A Oil cooler for engines over 340kW
MT0205-KIT Clutched power take-off for SAE 'B' hydraulic pump
MT0497-KIT Adaptor ring for PRM1750S to SAE1 flywheel
MT0514-KIT Adapter ring for PRM1750DSAE1 to SAE2 flywheel
MT4992 12 Volt trolling valve
MT4993 24 Volt trolling valve
 

Note: When ordering it is necessary to specify the flywheel size.

The choice of coupling must be made by the engine manufacturer/boat builder to ensure vibratory torque levels within the driveline are kept to a minimum within the engine operating speed range. This is particularly important as PRM1750 uses two stage gear reduction

 
 
 
 

 

Accessories

Product Note Status Price
All Parts PRM - Oil Filter Transmission PRM 140/175/250/265 All Parts PRM - Oil Filter Transmission PRM 140/175/250/265
84.00 € *
All Parts PRM - PRM Seal, Gasket and O Ring Kit (PRM 175 to 402) MT0381 All Parts PRM - PRM Seal, Gasket and O Ring Kit (PRM 175 to 402) MT0381
264.00 € *
Transmission PRM 500/750 Live PTO - Power Take Off, PRM MT0193 Transmission PRM 500/750 Live PTO - Power Take Off, PRM MT0193
1,020.00 € *
All Parts PRM - seal Kit Transmission PRM 100/101/140/175/250/260/265 All Parts PRM - seal Kit Transmission PRM 100/101/140/175/250/260/265
178.00 € *
All spare parts PRM - Pump Repair Kit PRM 100/101/140/175/250/260/265 All spare parts PRM - Pump Repair Kit PRM 100/101/140/175/250/260/265
268.00 € *
All Parts PRM - layshaft prm 160/260d, part number PRM MT1597 S/A, Kit All Parts PRM - layshaft prm 160/260d, part number PRM MT1597 S/A, Kit
1,434.23 € *
Delivery weight: 10 kg
PRM CP1331 Magnetic drainplug, PRM CP1268 PRM CP1331 Magnetic drainplug, PRM CP1268
62.15 € *
Delivery weight: 1 kg
All spare parts PRM - MT0392K Valve block gsk.kit - PRM 750 All spare parts PRM - MT0392K Valve block gsk.kit - PRM 750
91.29 € *
Delivery weight: 1 kg
Adapter set for oil filter PRM 140/175/250/265, replacement for Crosland filter 471 Adapter set for oil filter PRM 140/175/250/265, replacement for Crosland filter 471
129.00 € *
Delivery weight: 2 kg
PRM 1750, PRM MT8168 PRM Thrust Washer PRM 1750, PRM MT8168 PRM Thrust Washer
412.00 € *
Delivery weight: 2 kg
PRM 1750, PRM Needle bearings PRM 0560901 PRM 1750, PRM Needle bearings PRM 0560901
87.00 € *
Delivery weight: 2 kg
PRM 1750, PRM Needle bearings PRM 605501 PRM 1750, PRM Needle bearings PRM 605501
87.00 € *
Delivery weight: 2 kg
PRM 1750, PRM Spacer  PRM MT8303 PRM 1750, PRM Spacer PRM MT8303
84.00 € *
Delivery weight: 2 kg
PRM 1750, PRM Spring Ring PRM MT8240 PRM 1750, PRM Spring Ring PRM MT8240
39.00 € *
Delivery weight: 2 kg
* Prices incl. VAT, plus Shipping
Display accessory details

We also recommend

PRM CP1331 Magnetic drainplug, PRM CP1268
62.15 *
Delivery weight: 1 kg
PRM 1750, PRM MT8168 PRM Thrust Washer
412.00 *
Delivery weight: 2 kg
PRM 1750, PRM Needle bearings PRM 0560901
87.00 *
Delivery weight: 2 kg
PRM 1750, PRM Needle bearings PRM 605501
87.00 *
Delivery weight: 2 kg
PRM 1750, PRM Spacer PRM MT8303
84.00 *
Delivery weight: 2 kg
PRM 1750, PRM Spring Ring PRM MT8240
39.00 *
Delivery weight: 2 kg
* Prices incl. VAT, plus Shipping

Browse these categories as well: Gear - Marine Gearbox / Transmissions, PRM gear, Home MARITIMUS Boat Shop, Worldwide delivery, delivery of leading brands, Special Deals March