Print

Motorboat accessories

Motorboat accessories

Service: Andrea Zieger stands them in person and by phone: +0049(0)38231 402934, fax +0049(0)38231 402932 or email info@maritimusboote.de available.


Display per page
Sort by
251 - 300 of 706 results

System consists of:

  • Tapered stainless steel propeller shaft with key and proppeller nut. L=1500/2000 mm
  • Neoprene outer bearing with brass shell incorporated with tube
  • Bronze stern tube, one site threaded for outer flange L=1300/1600 mm
  • Adjustable inside mounting flange for stern tube
  • Self-aligning inner bearing with dual lip seal
  • Can easily be made to measure without machining

Set 1E:

shaft diameter: 30 mm

lengh: 1500 mm

stern tube lengh: 1300 mm

 

661.00 *

In stock

System consists of:

  • Taperred stainless steel propeller shaft with key and propeller nut. L= 1500/2000 mm
  • Bronze outer bearing with and nut and incorporated neoprene bearing
  • Bronze stern tube, one side threded for outer bearing L= 1000/1500 mm
  • Adjustable mounting flange for stern tube
  • Self-aligning inner bearing with dual lip seal
  • can easily be made to measure without machining

Set 1A:

shaft diameter: 25 mm

lengh: 1500 mm

stern tube lengh: 1000 mm

 

684.00 *

In stock

System consists of:

  • Taperred stainless steel propeller shaft with key and propeller nut. L= 1500/2000 mm
  • Bronze outer bearing with and nut and incorporated neoprene bearing
  • Bronze stern tube, one side threded for outer bearing L= 1000/1500 mm
  • Adjustable mounting flange for stern tube
  • Self-aligning inner bearing with dual lip seal
  • can easily be made to measure without machining

Set 1A:

shaft diameter: 25 mm

lengh: 2000 mm

stern tube lengh: 1500 mm

 

733.00 *

In stock

System consists of:

  • Taperred stainless steel propeller shaft with key and propeller nut. L= 1500/2000 mm
  • Bronze outer bearing with and nut and incorporated neoprene bearing
  • Bronze stern tube, one side threded for outer bearing L= 1000/1500 mm
  • Adjustable mounting flange for stern tube
  • Self-aligning inner bearing with dual lip seal
  • can easily be made to measure without machining

Set 1A:

shaft diameter: 30 mm

lengh: 2000 mm

stern tube lengh: 1500 mm

 

896.00 *

In stock

System consists of:

  • Taperred stainless steel propeller shaft with key and propeller nut. L= 1500/2000 mm
  • Bronze outer bearing with and nut and incorporated neoprene bearing
  • Bronze stern tube, one side threded for outer bearing L= 1000/1500 mm
  • Adjustable mounting flange for stern tube
  • Self-aligning inner bearing with dual lip seal
  • can easily be made to measure without machining

Set 1A:

shaft diameter: 30 mm

lengh: 1500 mm

stern tube lengh: 1000 mm

 

867.00 *

In stock

We deliver propeller shafts in every diameter and length. Incl. Seals and propellers

 

1,083.00 *
Delivery weight: 20 kg

In stock

System consists of:

  • Taperred stainless steel propeller shaft with key and propeller nut. L= 1500/2000 mm
  • Bronze outer bearing with and nut and incorporated neoprene bearing
  • Bronze stern tube, one side threded for outer bearing L= 1000/1500 mm
  • Adjustable mounting flange for stern tube
  • Self-aligning inner bearing with dual lip seal
  • can easily be made to measure without machining

Set 1A:

shaft diameter: 35 mm

lengh: 1500 mm

stern tube lengh: 1000 mm

 

1,083.00 *

In stock

System consists of:

  • Tapered stainless steel propeller shaft with key and proppeller nut. L=1500 mm
  • Bronze outer bearing with flange and nut and incorporated neoprene bearing
  • Bronze stern tube, both sides threaded L=1000 mm
  • Bronze rigid inner bearing with stuffing box
  • Bronze half coupling
  • flexible rubber coupling ( up to shaft diameter 35 mm )

Set 2:

shaft diameter: 25 mm

lengh: 1500 mm

stern tube lengh: 1000 mm

 

906.00 *

In stock

System consists of:

  • Tapered stainless steel propeller shaft with key and proppeller nut. L=1500 mm
  • Bronze outer bearing with flange and nut and incorporated neoprene bearing
  • Bronze stern tube, both sides threaded L=1000 mm
  • Bronze rigid inner bearing with stuffing box
  • Bronze half coupling
  • flexible rubber coupling ( up to shaft diameter 35 mm )

Set 2:

shaft diameter: 30 mm

lengh: 1500 mm

stern tube lengh: 1000 mm

 

1,067.00 *

In stock

System consists of:

  • Tapered stainless steel propeller shaft with key and proppeller nut. L=1500 mm
  • Bronze outer bearing with flange and nut and incorporated neoprene bearing
  • Bronze stern tube, both sides threaded L=1000 mm
  • Bronze rigid inner bearing with stuffing box
  • Bronze half coupling
  • flexible rubber coupling ( up to shaft diameter 35 mm )

Set 2:

shaft diameter: 35 mm

lengh: 1500 mm

stern tube lengh: 1000 mm

 

1,344.00 *

In stock

System consists of:

  • Tapered stainless steel propeller shaft with key and proppeller nut. L=1500 mm
  • Bronze outer bearing with flange and nut and incorporated neoprene bearing
  • Bronze stern tube, both sides threaded L=1000 mm
  • Bronze rigid inner bearing with stuffing box
  • Bronze half coupling
  • flexible rubber coupling ( up to shaft diameter 35 mm )

Set 2:

shaft diameter: 40 mm

lengh: 1500 mm

stern tube lengh: 1000 mm

 

1,504.00 *

In stock

System consists of:

  • Tapered stainless steel propeller shaft with key and proppeller nut. L=1500 mm
  • Bronze outer bearing with flange and nut and incorporated neoprene bearing
  • Bronze stern tube, both sides threaded L=1000 mm
  • Bronze rigid inner bearing with stuffing box
  • Bronze half coupling
  • flexible rubber coupling ( up to shaft diameter 35 mm )

Set 2:

shaft diameter: 45 mm

lengh: 1500 mm

stern tube lengh: 1000 mm

 

1,548.00 *

In stock

System consists of:

  • Tapered stainless steel propeller shaft with key and proppeller nut. L=1500 mm
  • Bronze outer bearing with flange and nut and incorporated neoprene bearing
  • Bronze stern tube, both sides threaded L=1000 mm
  • Bronze rigid inner bearing with stuffing box
  • Bronze half coupling
  • flexible rubber coupling ( up to shaft diameter 35 mm )

Set 2:

shaft diameter: 50 mm

lengh: 1500 mm

stern tube lengh: 1000 mm

 

1,703.00 *

In stock

Please when buying make the following information: manufacturer, type, bolt pattern and centering of your transmission.

359.00 *

In stock

Please when buying make the following information: manufacturer, type, bolt pattern and centering of your transmission.
787.00 *

In stock

Please when buying make the following information: manufacturer, type, bolt pattern and centering of your transmission.
954.00 *

In stock

We supply everything from Centaflex

1,396.00 *

In stock

29.50 *

In stock

64.00 *

In stock

9.80 *

In stock

9.80 *

In stock

9.80 *

In stock

1,170.00 *

In stock

1,419.00 *

In stock

995.00 *

In stock

579.00 *

In stock

693.00 *

In stock

11.00 *

In stock

The R&D 910 Series couplings consist of a contoured flexible disc moulded in tough yet resilient new type polyurethane. The contoured disc gives clearance for the bolt heads, and is able to flex freely to take up any temporary misalignment of the engine and shaft, due to flexing of the boat structure or the engine moving on its rubber vibration isolation mountings. Forward thrust is taken in compression on the disc between the two half couplings and reverse thrust is taken again in compression on the disc between the two fail straps. In the unlikely event of a disc failure the steel straps make the coupling fail safe and ensure drive is maintained in both forward and reverse.

1,889.30 *

In stock

With over 100,000 units sold, Tides Marine SureSeal® self-aligning shaft seals are used by more US pleasure boat builders than any other. The new Tides Marine SureSeal® Series Shaft Seals has redefined the standard, offering numerous design and performance improvements.

1,389.00 *
Delivery weight: 6 kg

In stock

EATURES
Pump Body: Bronze
Ports: 1 1/4" Hose
Cam: Full
Impeller: Neoprene
Shaft Seal: Lip Type
Drive: Crankshaft Pulley Mounted.
595.35 *
Delivery weight: 4 kg

In stock

Filter

Spiral

2mm outer tube inside 5mm (4m)

Tank connection with seal

Ventilation hose

136.30 *

In stock

Filter

Spiral

2mm outer tube inside 5mm (4m)

Tank connection with seal

Ventilation hose

186.30 *
Delivery weight: 6 kg

In stock

Translucent polyethylene, so you can see the level.
Can be mounted horizontally or vertically on the sheet.

 

product not available

238.30 *

product not available

8.90 *

In stock

9.90 *

In stock

9.30 *

In stock

13.90 *

In stock

NAUTA® flexible portable tanks are a remarkable improvement over the traditional painted metal tanks. Perhaps the most noticeable change : they do not leave rust rings on the floorboards or cockpit sole. These roll-up when empty tanks offer convenience in use and in stowage. They are also more comfortable to carry than most rigid tanks. They do not rust, will not scrape your paint, are easier to tie down and do not rattle when you are underway .

640.19 *

In stock

NAUTA® flexible portable tanks are a remarkable improvement over the traditional painted metal tanks. Perhaps the most noticeable change : they do not leave rust rings on the floorboards or cockpit sole. These roll-up when empty tanks offer convenience in use and in stowage. They are also more comfortable to carry than most rigid tanks. They do not rust, will not scrape your paint, are easier to tie down and do not rattle when you are underway .

615.46 *

In stock

NAUTA® flexible portable tanks are a remarkable improvement over the traditional painted metal tanks. Perhaps the most noticeable change : they do not leave rust rings on the floorboards or cockpit sole. These roll-up when empty tanks offer convenience in use and in stowage. They are also more comfortable to carry than most rigid tanks. They do not rust, will not scrape your paint, are easier to tie down and do not rattle when you are underway .

810.90 *
Delivery weight: 9 kg

In stock

NAUTA® flexible portable tanks are a remarkable improvement over the traditional painted metal tanks. Perhaps the most noticeable change : they do not leave rust rings on the floorboards or cockpit sole. These roll-up when empty tanks offer convenience in use and in stowage. They are also more comfortable to carry than most rigid tanks. They do not rust, will not scrape your paint, are easier to tie down and do not rattle when you are underway .

989.90 *

In stock

NAUTA® flexible portable tanks are a remarkable improvement over the traditional painted metal tanks. Perhaps the most noticeable change : they do not leave rust rings on the floorboards or cockpit sole. These roll-up when empty tanks offer convenience in use and in stowage. They are also more comfortable to carry than most rigid tanks. They do not rust, will not scrape your paint, are easier to tie down and do not rattle when you are underway .

1,808.90 *

In stock

Made of high density polyethylene.

If you have a boat, car, ATV, engine and a tank, tanks, outboard tank, inner tank, fuel tank for motor, motor-tank, fuel tank, fuel tank, fuel tank, gasoline canisters, tanks, diesel tank, fuel canisters are looking for, then please give the Keyword fuel canister or ask them via phone, email or in person to us.

We carry tanks for any application, in any material and in any size.

44.90 *

In stock

For all Teleflex steering heads, etc.
898.00 *

In stock

Including Niro tax bracket, Teleflex Morse-capita tax, Telefelex-Morse control cables, steering wheel RIVERA, mounting plate for the engine remote control Cable length 579 cm. Up to 610 cm available,
868.00 *

In stock

Including Niro tax bracket, Teleflex Morse-capita tax, Telefelex-Morse control cables, steering wheel RIVERA, mounting plate for the engine remote control Cable length 610 cm. Up to 610 cm available,
878.00 *

In stock

S e a S t a r  h y d r a u l i c  o u t b o a r d  s t e e r i n g  s y s t e m

Complete systems SeaStar 1.7 Kit (w/Hoses) HK6316A


Single and multiple non-power-assisted outboard engine applications up to 350hp for singles
(up to 700 hp for counter-rotating twins). Patented “Pivot” design allows independent engine tilt in dual engine
installations.
For multi-engine, aggressive use boats, please use Tournament Type Cylinders.

Components
SeaStar 1.7 Helm HH5271
Front Mount O/B Cylinder HC5345
Hose Kit (2 Hoses) HO5116
SeaStar Oil (1 quart mil spec H5606) - 2 per kit HA5430
(Multiple engine applications require the purchase of
additional components. Contact us for more information.)


Options (Not included in kit form. Items to be purchased separately)
SeaStar 1.7 sports tilt helm/mechanism HH6191
SeaStar 1.7 traditional tilt helm/mechanism HH5741
Round “drop in kit” HA5417
Square “drop in kit” HA5418


service items
SeaStar Oil (1 Gallon) HA5440
Steering Wheel Locknut 747521

1,370.00 *

In stock

S e a S t a r  h y d r a u l i c  o u t b o a r d  s t e e r i n g  s y s t e m

Complete systems SeaStar 1.7 Kit (w/Hoses) HK6316A


Single and multiple non-power-assisted outboard engine applications up to 350hp for singles
(up to 700 hp for counter-rotating twins). Patented “Pivot” design allows independent engine tilt in dual engine
installations.
For multi-engine, aggressive use boats, please use Tournament Type Cylinders.

Components
SeaStar 1.7 Helm
Sport Tilt HH6191
Front Mount O/B Cylinder HC5345
Hose Kit (2 Hoses) HO5116
SeaStar Oil (1 quart mil spec H5606) - 2 per kit HA5430
(Multiple engine applications require the purchase of
additional components. Contact us for more information.)


Options (Not included in kit form. Items to be purchased separately)
SeaStar 1.7  helm HH5271
SeaStar 1.7 traditional tilt helm/mechanism HH5741
Round “drop in kit” HA5417
Square “drop in kit” HA5418


service items
SeaStar Oil (1 Gallon) HA5440
Steering Wheel Locknut 747521

1,480.00 *

In stock

* Prices incl. VAT, plus Shipping
251 - 300 of 706 results