Mon | Closed |
Tue |
9:00 AM 2:00 PM |
- |
12:00 PM 4:00 PM |
Wed |
9:00 AM 2:00 PM |
- |
12:00 PM 4:00 PM |
Thu |
9:00 AM 2:00 PM |
- |
12:00 PM 4:00 PM |
Fri |
9:00 AM |
- |
12:00 PM |
Sat | Closed |
Sun | Closed |
Do you have any questions about the product, installation, delivery or payment? Our friendly and competent service is at your disposal
e-mail
info@maritimusboote.de
Phone number
+49 (0) 38231 402934
to disposal.
Friends / followers / pictures
Facebook: MaritimusYachting
twitter: MaritimusBoote
Picasa Web Albums: Maritime Boats
Skype Internet Phone Name:
maritime_boats
In stock
We supply everything from PSS
Please always write the shaft diameter and stern tube diameter
The PSS shaft seal type B is a mechanical shaft seal. The sealing surface is created between the flat surfaces of the rotating stainless steel rotor and the stationary carbon flange.
The stationary carbon flange is attached to the front of the bellows with hose clamps and the rear end of the bellows over the star tube and is secured with hose clamps. The stainless steel rotor is mounted on the shaft in front of the carbon flange. The stainless steel rotor is used to compress the bellows before the rotor is attached to the shaft with set screws. This compression (preload) ensures constant contact between the two flat sides of the stainless steel rotor and the carbon flange. This means that the PSS shaft seal can compensate for the variable forward and backward movement caused by the propeller thrust. The carbon flange is over-bored to the shaft diameter so that it can "float" around the shaft, compensating for most misalignment and vibration problems. The stainless steel rotor is sealed against the shaft by two O-rings embedded in the bore of the collar. These O-rings rotate with the shaft and the stainless steel rotor and are not subject to wear during operation.
PSS maintenance kit 30 mm shaft including screws, assembly tools and glue
34.50 €
*
Delivery weight: 3 kg
|
PSS Shaft Seal, Shaft Diameter 25mm, Stern Tube Diameter 1 3/4' (42.6mm)
409.00 €
*
Delivery weight: 8 kg
|
|
PSS seal 1 1/2 "shaft, 21/4" stern tube, without water supply, up to 12 KN
439.00 €
*
Delivery weight: 8 kg
|
||
PSS seal1 1/2 'shaft, 4' stern tube, oversizer, type A, PSS 02-112-400
692.00 €
*
Delivery weight: 8 kg
|
||
Water cooled exhaust OM 605 Mercedes OM 606 engine with tank and heat exchanger
1,916.00 €
*
Delivery weight: 20 kg
|
||
Stern tube shaft seal PSS 6 "shaft, 8" stern tube, type B, PSS 02-600-800
9,478.00 €
*
Delivery weight: 36 kg
|
||